| 輸出信號 |
| 頻率范圍 |
10kHz – 1GHz |
| 調制范圍 |
1Hz – 1kHz, 10% - 90% |
| 脈沖調制 |
1Hz / 1kHz, 50% duty cycle |
| 輸出阻抗 |
50Ω |
| 接頭 |
N female |
| 駐波比 |
< 2.5:1 |
| 功率計 |
| 前向功率（選件） |
Power meter CH1, 10kHz – 4GHz |
| 反向功率（選件） |
Power meter CH2, 10kHz – 4GHz |
| 監視電流 |
Power meter CH3, 10kHz – 4GHz |
| 測試過程 |
| 標定 |
Self calibration, calibration data saved in RT1000 |
| 監視 |
Display of the data of 3 power meters on LCD |
| 測試報告 |
Test report built automatically |
| 一般性能 |
| 接口 |
RS 232 / IEEE 488 / USB 2.0 |
| 電源 |
110V – 240VAC, 50/60Hz |
| 環境溫度 |
5℃ - 40℃ |
| 選件 |
| ATT 3 / 6-100 |
3 / 6dB attenuator, 100W |
| T50-10 |
Termination, 10W |
| PM02 |
Integrated current monitor |
| CDNs |
According to IEC 61000-4-6 |
| Clamps / probes |
EM clamps / probes according to IEC 61000-4-6 |
| |
Current injection / monitoring clamps / probes
According to ISO 11451-4 / ISO 11452-4 / MIL 461 CS 114 / DO 160 |
| Field probes |
Field strength probes |
| According to IEC 61000-4-3 / ISO 11451-2 / ISO 11452-2 / MIL 461 RS 103 |
| Calibration jig |
For injection devices |
| RP1 |
Rear panel RF output |
| RP2 |
Rear panel RF monitor |
| Signal generator1 |
10kHz – 400MHz |
| Signal generator2 |
10kHz – 230MHz |
| Amplifier1 |
Integrated RF power amplifier |
| 100kHz - 230MHz, P1dB = 25W |
| Amplifier2 |
Integrated RF power amplifier |
| 100kHz - 230MHz, P1dB = 75W |
| Amplifier4 |
Integrated RF power amplifier |
| 10kHz - 400MHz, P1dB = 100W |
| Amplifier5 |
Integrated RF power amplifier |
| 10kHz – 1GHz, P1dB = 30W |
| Amplifier6 |
Integrated RF power amplifier |
| 150kHz – 1GHz, P1dB = 60W |
首頁 > 產品分類 > 射頻EMS測試設備 > 一體化測試系統 > RT1000 
網站地圖